Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Wed Nov 27, 2024 11:32 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 22 posts ] 
Author Message
PostPosted: Fri Dec 13, 2019 2:49 pm 
Offline
Koa
Koa

Joined: Fri Feb 10, 2017 11:09 pm
Posts: 870
Location: Cowichan Valley, BC, Canada
First name: Conor
Last Name: Searl
City: Duncan
State: British Columbia
Zip/Postal Code: V9L 2E5
Country: Canada
Status: Semi-pro
My experience is limited. Up to this point all the head stock repairs I've done have either been, previous repair failures, (I've added back straps and new face plates to both of those, as there was missing wood and not much gluing surface) or inexpensive guitars that didn't warrant a major repair and the customer was fine with the risk involved with simply gluing/clamping the crack.

So I have a mid-range Martin guitar here that has likely just succumbed to the "heavy" (not medium, he's decided for the future to stick to mediums) strings its owner regularly uses. There's no glue joint failure, just a fairly significant crack running along the grain. I should have no problem getting sufficient glue inside the crack and clamping it closed, the finish isn't even disturbed around the crack, it should look pretty much invisible when its done.

So my question is simply this, when it comes to cracked head stocks a back strap or splines will be a sure fix, but are they overkill and unnecessary for a simple job like this?


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Fri Dec 13, 2019 3:16 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5823
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
On a break that clean, I wouldn't bother. Touch up the finish, and call it good.

_________________
"Act your age, not your shoe size" - Prince


Top
 Profile  
 
PostPosted: Fri Dec 13, 2019 3:25 pm 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 13387
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
Rarely.

Not a fan of splines and back straps and instead tool-up with a Collins head stock repair jig (threads here on how to make one and on FRETS.net) and you usually won't need them.

IIRC correctly since we do lots of head stock repairs because of our videos and special tooling we only used splines once and regretted it.


Top
 Profile  
 
PostPosted: Fri Dec 13, 2019 4:32 pm 
Offline
Koa
Koa

Joined: Fri Feb 10, 2017 11:09 pm
Posts: 870
Location: Cowichan Valley, BC, Canada
First name: Conor
Last Name: Searl
City: Duncan
State: British Columbia
Zip/Postal Code: V9L 2E5
Country: Canada
Status: Semi-pro
Hesh wrote:
Rarely.

Not a fan of splines and back straps and instead tool-up with a Collins head stock repair jig (threads here on how to make one and on FRETS.net) and you usually won't need them.

IIRC correctly since we do lots of head stock repairs because of our videos and special tooling we only used splines once and regretted it.


Now I've got to ask, why regret?


Top
 Profile  
 
PostPosted: Fri Dec 13, 2019 5:03 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5823
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
Hesh can answer for himself, but I bet it's because it's of lot of time, work, and bigger charges - for no or little improvement over just gluing up the dang thing.

_________________
"Act your age, not your shoe size" - Prince


Top
 Profile  
 
PostPosted: Fri Dec 13, 2019 5:24 pm 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 13387
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
Chris Pile wrote:
Hesh can answer for himself, but I bet it's because it's of lot of time, work, and bigger charges - for no or little improvement over just gluing up the dang thing.


Exactly and Happy Holidays, Merry Christmas to you Chris and Connor.

Much more work as Chris said and I'll add way more risk because if you screw it up you either fix it or buy it.

We price accordingly too so this is not a cheap repair with us and I don't have my list here but we are around $300 to do one without splines or back straps.

We don't and won't promise invisibility but 90% of ours are invisible and the 10% that isn't you really have to look for it to see that it's been repaired.

Regarding the pricing this is something I spend a lot of time and effort considering and studying what others do all over the country

When you repair a broken headstock you are providing value at a level way beyond a simple head stock repair. You are saving the instrument from the scrap heap and that's............................value! Value deserves to be compensated hence what we charge.

We are also selective in what we take in. If the headstock is a mess, the instrument is not great anyway we might decline if we don't think that it will go together nicely. We have no problem picking at fibers and getting everything in place but some breaks AND how they were abused afterwards are better off not taken in and we make no bones about this.

A huge part of being a successful Luthier is not only knowing how to do the work with top shelf skills and knowledge but also knowing that unwanted liability can destroy your business and reputation. I'm generally speaking here but the Luthier who thinks that they can fix it all perfectly all of the time is going to fail ultimately not because of their chops, knowledge, the market, a specific repair or instrument but because of their ego.

BTW again in my studies for that book I might write the number one reason why most Luthiers try and fail and then get out of the trade is trying to be all things to all folks.

If a head stock repair looks overly problematic turn it away.



These users thanked the author Hesh for the post (total 3): DanKirkland (Fri Dec 13, 2019 11:06 pm) • Clinchriver (Fri Dec 13, 2019 6:04 pm) • Smylight (Fri Dec 13, 2019 5:37 pm)
Top
 Profile  
 
PostPosted: Fri Dec 13, 2019 7:11 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5823
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
Talk about good timing..... A big local store called me about a peghead break on a Peavey 5 string bass.... My kneejerk reaction was, "Peavey? Toss it!". But I'll probably go look at it in the morning and give an estimate.

_________________
"Act your age, not your shoe size" - Prince


Top
 Profile  
 
PostPosted: Sat Dec 14, 2019 12:55 am 
Offline
Contributing Member
Contributing Member

Joined: Sun Jun 08, 2014 10:06 pm
Posts: 414
First name: Allan
Last Name: Bacon
State: Kansas
Country: USA
Focus: Repair
Chris Pile wrote:
Talk about good timing..... A big local store called me about a peghead break on a Peavey 5 string bass.... My kneejerk reaction was, "Peavey? Toss it!". But I'll probably go look at it in the morning and give an estimate.

If you decide not to do it, send it my way...


Top
 Profile  
 
PostPosted: Sat Dec 14, 2019 1:19 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5823
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
Quote:
If you decide not to do it, send it my way...


What? You give up the gubmint job already?

_________________
"Act your age, not your shoe size" - Prince


Top
 Profile  
 
PostPosted: Sat Dec 14, 2019 7:41 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2010 9:06 pm
Posts: 2739
Location: Magnolia DE
First name: Brian
Last Name: Howard
City: Magnolia
State: Delaware
Zip/Postal Code: 19962
Country: United States
Focus: Repair
Status: Professional
Splines cause more problems than they fix a lot of times.

This neck would likely have been fine after the first repair if splines were not used but they were and it actually weakened the neck!
https://howardguitars.blogspot.com/2015 ... epair.html

_________________
Brian

You never know what you are capable of until you actually try.

https://www.howardguitarsdelaware.com/



These users thanked the author B. Howard for the post (total 2): Chris Pile (Sat Dec 14, 2019 10:56 am) • Hesh (Sat Dec 14, 2019 9:45 am)
Top
 Profile  
 
PostPosted: Sat Dec 14, 2019 7:43 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2010 9:06 pm
Posts: 2739
Location: Magnolia DE
First name: Brian
Last Name: Howard
City: Magnolia
State: Delaware
Zip/Postal Code: 19962
Country: United States
Focus: Repair
Status: Professional
Hesh wrote:

If a head stock repair looks overly problematic turn it away.



Or call me! ;)

_________________
Brian

You never know what you are capable of until you actually try.

https://www.howardguitarsdelaware.com/


Top
 Profile  
 
PostPosted: Sat Dec 14, 2019 9:49 am 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 13387
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
B. Howard wrote:
Hesh wrote:

If a head stock repair looks overly problematic turn it away.



Or call me! ;)


What we turn away is more often than not turned away because the repair would be poorly done or compromised for one factor or another. There is also the instances of a $199 guitar with a $300 head stock break.

I don't know why anyone would want to have anything that we turned away when the reason we turn stuff away is not our skill set it's the thing is junk and will never be right no matter who does it.

So I won't be calling you or anyone for that matter. :)

Happy Holidays, Merry Christmas Brian


Top
 Profile  
 
PostPosted: Sat Dec 14, 2019 10:58 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5823
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
Quote:
Splines cause more problems than they fix a lot of times.

This neck would likely have been fine after the first repair if splines were not used but they were and it actually weakened the neck!


Someone went to a LOT of trouble to do a really crummy job. But Brian saved it.

_________________
"Act your age, not your shoe size" - Prince


Top
 Profile  
 
PostPosted: Sat Dec 14, 2019 4:01 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2010 9:06 pm
Posts: 2739
Location: Magnolia DE
First name: Brian
Last Name: Howard
City: Magnolia
State: Delaware
Zip/Postal Code: 19962
Country: United States
Focus: Repair
Status: Professional
Hesh wrote:
There is also the instances of a $199 guitar with a $300 head stock break.



Or the more common $500 neck re-set on a $100 guitar.

I point out the price factor and recommend against but in the end if they want to pay (in advance) and wait the allotted time I take their money. If I got the time in my schedule it's just another guitar to me..... I am ultimately in the people business as I have said before. There is a class of guitar owner that will pay premiums actually for repairs exactly like this for sentimental reasons. And I have developed a few good client relationships that started with sentimental underwater jobs where the repair cost 2-3 timed the value of the guitar.

Even some of the higher end Gibby work I do.... I Did an ES 125 for a guy where the bill was easily twice the resale value of the instrument when done. It was his Dad's guitar when he was young and he spent a decade tracking down a busted husk and even tracked down the original electronics that his dad had in it. Should that be trashed on a cost analysis basis? Not if I can help it anyway.

I do turn work away but I guess just on a different set of criteria...

_________________
Brian

You never know what you are capable of until you actually try.

https://www.howardguitarsdelaware.com/



These users thanked the author B. Howard for the post (total 2): DanKirkland (Sun Dec 15, 2019 4:59 pm) • Hesh (Sun Dec 15, 2019 1:33 pm)
Top
 Profile  
 
PostPosted: Sun Dec 15, 2019 4:40 pm 
Offline
Cocobolo
Cocobolo

Joined: Mon Jun 15, 2015 7:39 am
Posts: 117
B. Howard wrote:
Splines cause more problems than they fix a lot of times.

This neck would likely have been fine after the first repair if splines were not used but they were and it actually weakened the neck!
https://howardguitars.blogspot.com/2015 ... epair.html

Hey Brian, I was just wondering - I have a Les Paul that I bought with a missing headstock for $60 to learn my chops. I’m really happy with how my replacement headstock turned out having done a scarfe joint, but the repair is ghosting through the finish slightly. Do you reckon if I stripped it back and used your epoxy wrap technique it would resolve this? The joint was pretty good but clearly not perfect. Finish is acrylic 1k base with pre-cat nitro clear. Image

Image
Sent from my iPhone using Tapatalk


Top
 Profile  
 
PostPosted: Mon Feb 03, 2020 11:13 pm 
Offline
Mahogany
Mahogany

Joined: Sun May 09, 2010 6:10 am
Posts: 64
First name: David
Last Name: Radlin
City: Belle River
State: Ontario
Zip/Postal Code: N0R 1A0
Country: Canada
Focus: Repair
Status: Semi-pro
As I see it, if it’s a short grain break then there is no avoiding a spline or alternative.

I’m not a fan of splines installed in a captivated slot due to the end grain to end grain glue condition.

To avoid that, I developed a jig that sweep cuts a slot into which a radius biscuit is installed.

After first glueing the headstock back in place, the process of adding splines looks like this...

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

The full repair can be seen here:

https://www.facebook.com/16186114050187 ... 119174536/

_________________
David Radlin
http://www.facebook.com/radlin.guitars



These users thanked the author dradlin for the post: olmorton71 (Tue Feb 25, 2020 8:44 pm)
Top
 Profile  
 
PostPosted: Tue Feb 04, 2020 12:41 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5823
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
Well done!

_________________
"Act your age, not your shoe size" - Prince



These users thanked the author Chris Pile for the post: dradlin (Tue Feb 04, 2020 7:24 am)
Top
 Profile  
 
PostPosted: Tue Feb 04, 2020 6:08 am 
Offline
Contributing Member
Contributing Member

Joined: Sun Feb 17, 2013 4:58 pm
Posts: 1449
First name: Ed
Last Name: Minch
City: Chestertown
State: MD
Zip/Postal Code: 21620
Country: United States
Focus: Build
Status: Amateur
David

Very nice work on that. Fine finish too

Ed



These users thanked the author Ruby50 for the post: dradlin (Tue Feb 04, 2020 7:25 am)
Top
 Profile  
 
PostPosted: Tue Feb 04, 2020 7:52 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2010 9:06 pm
Posts: 2739
Location: Magnolia DE
First name: Brian
Last Name: Howard
City: Magnolia
State: Delaware
Zip/Postal Code: 19962
Country: United States
Focus: Repair
Status: Professional
Bosco Birdswood wrote:
B. Howard wrote:
Splines cause more problems than they fix a lot of times.

This neck would likely have been fine after the first repair if splines were not used but they were and it actually weakened the neck!
https://howardguitars.blogspot.com/2015 ... epair.html

Hey Brian, I was just wondering - I have a Les Paul that I bought with a missing headstock for $60 to learn my chops. I’m really happy with how my replacement headstock turned out having done a scarfe joint, but the repair is ghosting through the finish slightly. Do you reckon if I stripped it back and used your epoxy wrap technique it would resolve this? The joint was pretty good but clearly not perfect. Finish is acrylic 1k base with pre-cat nitro clear. Image

Image
Sent from my iPhone using Tapatalk



Finish "ghosting" is quite normal for a repair like that. No matter what you use to finish over it it will show, it is caused by the different pieces of wood reacting slightly differently to RH

_________________
Brian

You never know what you are capable of until you actually try.

https://www.howardguitarsdelaware.com/


Top
 Profile  
 
PostPosted: Tue Feb 04, 2020 8:05 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2010 9:06 pm
Posts: 2739
Location: Magnolia DE
First name: Brian
Last Name: Howard
City: Magnolia
State: Delaware
Zip/Postal Code: 19962
Country: United States
Focus: Repair
Status: Professional
My 2 cents, Looks nice.

I do not like curved splines like that however. They are completely dependant on whatever glue surface is on the sides. The entire bottom edge of the spline and bottom of the trench are all end grain joint now...... So you gave up the largest part of the glue surface to the new pieces that you are now saying must hold it all together. Yours are longer than the biscuit style typically used that are simply cut in with a 4" blade as so many do. That may or may not make it any stronger.

I typically cut mine at an angle like a mini neck blank and run them completely up to the bottom of the FB under the neck. When I put them in it is for one reason only, the break and neck are so compromised there is little other choice so I replace as much badd wood as I can and restore as much stability as possible.

_________________
Brian

You never know what you are capable of until you actually try.

https://www.howardguitarsdelaware.com/


Top
 Profile  
 
PostPosted: Tue Feb 04, 2020 8:12 am 
Offline
Mahogany
Mahogany

Joined: Sun May 09, 2010 6:10 am
Posts: 64
First name: David
Last Name: Radlin
City: Belle River
State: Ontario
Zip/Postal Code: N0R 1A0
Country: Canada
Focus: Repair
Status: Semi-pro
B. Howard wrote:
My 2 cents, Looks nice.

I do not like curved splines like that however. They are completely dependant on whatever glue surface is on the sides...


A fair concern, and why I size the biscuit with a slight gap and use West System epoxy ensuring adhesion on all sides of the biscuit.

Additionally the grain orientation of the biscuit is biased to the substrate grain as an added measure.

This is a solid repair.

_________________
David Radlin
http://www.facebook.com/radlin.guitars


Top
 Profile  
 
PostPosted: Tue Feb 04, 2020 9:45 am 
Offline
Koa
Koa

Joined: Mon Feb 13, 2012 8:49 pm
Posts: 1041
First name: peter
Last Name: havriluk
City: granby
State: ct
Zip/Postal Code: 06035
Country: usa
Focus: Build
Status: Amateur
I think the pictured repair, to my eyes, is a wonderful rescue of a useless guitar unless such a repair was made. As in fixing a dented fender, it's never going to be un-dented, so different rules apply. Like was the repair about as good as could be done given the limitations of the context of the repair?

About broken headstocks, maybe a neck replacement sometimes offers a workable solution? No idea, just asking.

And thanks to everyone for discussing/photographing.

_________________
Peter Havriluk


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 22 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 8 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com